Skip to content

Interior demolition · Collier County

Interior demolition in Collier County

Interior work in Collier County splits into two kinds. One is the planned strip-out of a condo, office or shop before a renovation. The other is the flood cut: a house the water reached, opened up to dry. The first is a scheduling puzzle. The second is a race against mold.

A room stripped to bare brick and concrete, with a hand truck, buckets and bags of material on the floor.

After Hurricane Ian, reports put water above six feet inside some homes the surge reached. Drywall and insulation that wet hold moisture against the framing for weeks. Cutting them out early and drying the structure usually costs less than finding mold behind fresh paint, and an insurer will want photographs of each stage, which we take as we go.

Inside a Naples tower or a Marco Island condo building, the association's contractor rules decide more than the demolition itself: elevator pads, work hours, how debris crosses the lobby, which forms each trade files. We ask for the rulebook at the first visit and price around it.

Floor tile, mastic and ceiling texture in older buildings can contain asbestos, and a licensed consultant should test them before a single tile is lifted. Visible mold goes to a licensed mold remediator, not to the demolition crew.

A floor plan, the association's rules or a few photographs are enough to start. The quote separates what is removed, what is protected and where our work stops.

Order of work

  1. Site visit with the plans and the building's contractor rules in hand
  2. Asbestos testing, if the building is old enough and no report exists
  3. Photographs of the space for the insurer before anything moves
  4. Confirmation of live lines and scheduled shutdowns with the licensed trades
  5. Permit application, where the scope needs one
  6. Cut-out and carry-out in the agreed order, with protection on what stays
  7. Drying, cleaning and a joint walk-through with the next trade

Common snags

What tends to hold these jobs up, and our answer to each

Wet materials left in place

Flooded drywall and insulation keep framing damp. We cut back to dry, sound material and let the structure air before anything closes in.

Shared risers and live fire systems

In a condo one wrong cut can reach a neighbor's unit or trip the building alarm. The association's engineer confirms what is live and licensed trades handle any shutdown.

Lobby and elevator limits

Heavy debris needs a route the building will allow. We agree on pads, hours and floor protection before the first load comes down.

Finishes nobody tested

Old flooring and ceilings may hold asbestos. We have them surveyed first so the crew is not the one to find out.

Where our role ends

Fire sprinkler impairments, electrical make-safe work and plumbing caps are licensed trades, and we arrange them. Whether an interior job needs a permit depends on the office and the scope. On Marco Island, for example, an interior-only permit covers interior work and nothing else.

Questions

About interior demolition

Do flood-damaged rooms have to be gutted?

Not always. It turns on how long the materials stayed wet and what they are. Drywall and insulation that soaked in floodwater usually go, and the framing is dried and checked. We decide after seeing the space.

Can you work inside an occupied condo tower?

Yes. We plan around elevator reservations, quiet hours and the association's debris rules, and the cost of that planning appears in the quote from the start.

What goes into the cost of a demolition?

A quote comes after we visit the property, or after we review photos and drawings that show enough. The price follows the building's materials and height, the asbestos survey, utility and septic work, how machines reach the lot, what stays, and where the debris goes. We do not publish prices, because two lots that look alike seldom cost alike.

Is there a size limit on the jobs you price?

No limit. Sheds, pools, slabs and single walls get a quote, and so do whole buildings, selective or structural. Describe what stands on the lot and what must stay, and the price follows that description.

Is Romco Builders licensed?

Yes. Romco Builders is a Florida-licensed general contractor with headquarters in Fort Lauderdale. Some tasks need a license or permit of their own, among them asbestos abatement, electrical disconnects, septic abandonment and tree removal. Those go to the firms or agencies with that authority, and we fit them into a single schedule.

Start to finish

Six stages in a fixed order

  1. Send the address and the scope

    Ring us or use the quote form, and attach photos or drawings if you have them. Give the area, what has to go and what has to stay.

  2. We walk the site

    We visit the lot and look at the building, the utility connections, septic or sewer, the flood zone, how machines and trucks will get in, and the neighbors.

  3. Written scope and quote

    A written quote lists what comes out, what is shielded, and what leaves by truck. Anything that depends on a survey is marked.

  4. Surveys, permit and disconnects

    Required asbestos testing, utility shutoffs and septic abandonment happen here, and the permit goes to the office that covers your parcel.

  5. Demolition and haul-off

    The crew follows the agreed order of work. Debris is taken to permitted facilities, and load records are kept.

  6. Final inspection

    The permit is closed by the building department after its last inspection, leaving a clear lot or the shell you requested.

Interior demolition across Collier, including Naples, Old Naples, Marco Island, Everglades City, Chokoloskee, Goodland, Isles of Capri, Immokalee, Golden Gate Estates, Bayshore and Gateway Triangle, and every other Collier city.

Also on our list

Other demolition we price

Any type, any size, anywhere in Collier County

Name the place and the job, and we will put a price on it.

Romco Builders is a licensed Florida general contractor, headquartered in Fort Lauderdale. A single wall or a full building: either way you get a written scope and a quote.

Call (239) 510-4206Request a quote